View Larger Atex Approved Atex Explosion Proof Lights Manufacturer

• Lamp Body Material: Aluminum Alloy
• IP Rating: IP66
• Irradiated Area: 10-15m²
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: MXEL 8189
• Input Voltage: 220v
• Power: 10-45W
• Color Temperature: Warm White
• Emitting Color: White
• LED Chips Brand: CREE3030
• Certification: CCC, CE, RoHS
• Weight: 3.2kg
• Anticorrosion Grade: Wf2
• Explosion Proof Mark: Exdiict6 GB/Extd A21 T80ºC
• Beam Angle: 111.1°
• Transport Package: Carton Box
• Specification: 274x284mm
• Trademark: Maxtree
• Origin: Shang Hai
• HS Code: 85122010
• Production Capacity: 3000PCS/Month
• Package Size: 30.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 5.000kg

Product Description

Product Description

LED Explosion Proof Lights have good explosion-proof function, suitable for IIA, IIB, IIC explosive gas environment and various inflammable and explosive places, mainly used in railway, electric power, metallurgy, petroleum, petrochemical, chemical, steel, aviation, ship and each efficient lighting in factories, stations, large facilities, venues and other places.

 

 

Features
 

(1) Using imported LED light source, the average service life is up to 100,000 hours. The power supply adopts wide voltage processing, which can achieve constant current output. It has the function of short circuit and over voltage protection, and greatly prolongs the service life of the lamps.

(2) The design of the convection structure with independent upper and lower ventilation improves the heat dissipation performance and avoids the accumulation of dust in conventional LED radiators. The radiators are arranged in an internal and external circular array to improve the heat dissipation performance.

(3) Using high purity tempered glass, the transmittance is as high as 95%-98%. Light projection is uniform and soft, especially suitable for all kinds of low-roof, platform, high-roof, high-shed and other places as fixed lighting.

(4) The protection level of the lamp body is IP66, and the anti-corrosion level can reach WF2. The surface of the lamp body will never corrode and rust.

(5) Various installation modes such as suspended ceiling, bent bar, vertical bar, ceiling suction and U-shaped shock-proof bracket (adjustable angle) can be adopted as required.







 

Detailed Photos

 

 

Product Parameters

 

Power	10w20w,30w,45w
Voltage	AC220V 50/60Hz
Size	Ф180x133mm
Weight	3.2kg
Life Hour	100000HRS
Protection level	IP66
Anticorrosion grade	WF2
Explosion proof mark	ExdIICT6 Gb/ExtD A21 T80ºC
Beam Angle	111.1°

 

Installation Instructions

Application scenarios

 

 

Caution

Schematic diagram

 

1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.     
       
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.    
        
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.   
         
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.       
    
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.


Using The Matters Needing Attention

1. This product is an explosion-proof product and can be used in explosion-proof places.

2. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.

3. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.

4. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.

5. The luminaire must be reliably grounded


Quality Assurance

The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.