ATEX 24V 36V Zone 1 Zone 2 Twin Spot Light LED Explosion Proof Emergency Escape Lights

Product Description

ATEX 24V 36V Zone 1 Zone 2 Twin Spot Light LED Explosion Proof Emergency Escape Lights

Product Parameters

 

ITEM	RATED POWER	INPUT VOLTAGE	EMERGENCY TIME	EXPLOSION-PROOF MARK
BCJ52	2 x 3W 2 x 5W	DC24V DC36V AC127V AC220V	≥90min ≥3h ≥6h ≥8h	Ex db eb mb IIC T6Gb; Ex tb IIIC T80ºC Db
OTHERS	The lamp housing color, light color, style, voltage can all be customized, please contact us.
COMMON	LIGHT SOURCE TYPE:	LED	MATERIAL:	Aluminum Alloy
	BATTERY CAPACITY:	1000mAH	CHARGING TIME:	≤24 hours
	INLET THREAD SPECIFICATIONS:	G3/4"	APPLICABLE CABLE OD:	Φ6~14mm
	OPERATING AMBIENT TEMPERATURE:	-25°C~+60°C	IP RATING:	IP68(1m, 45min)
	LIGHT BRIGHTNESS:	≥50Lm	PRESSURE TEST:	1500V
	DIMENSIONS:	271 x 255 x 85mm	WEIGHT:	2.7 KG
CERT	ATEX, CE, IP68, IK10, ROHS, ISO9001
FEATURES	· The flameproof, increased safety, cast-in-place composite structure can be used in environments with gases and dust of the corresponding explosion-proof levels.  · The aluminum alloy die-cast housing features an electrostatically sprayed surface for an attractive appearance.  · It utilizes a high-brightness LED light source, offering low power consumption, long service life, and maintenance-free operation.  · It houses a sealed nickel-cadmium battery pack that automatically charges during normal operation and provides over 90 minutes of emergency power in the event of a power outage.  · The highly protective structural seal design, equipped with an aging-resistant silicone rubber sealing gasket, provides excellent protection.  · The lamp features three-color indicators for main power, charging, and fault status, allowing users to monitor the lamp's operating status at all times.  · The transparent cover is made of high-strength acrylic with secondary dimming, offering excellent impact resistance and high light transmittance.  · It is suitable for wall mounting and can be routed via steel pipes or cables.
APPL	· Oil & Gas Platforms  · Chemical Processing Plants  · Grain Silos & Flour Mills  · Offshore Drilling Rigs  · LNG Stations  · Coal Mines & Tunnel Infrastructure  · Hazardous Storage Warehouses  · Zone 1 and Zone 2  · For temperature groups T1~T6  · For IIA, IIB, IIC explosive gas environments

Product Description

Designed for hazardous environments, the Explosion-Proof Double-Head Emergency Light ensures reliable illumination and safety in potentially explosive atmospheres. Its robust construction, advanced lighting technology, and self-sustaining power backup make it an ideal solution for emergency lighting in oil refineries, chemical plants, gas stations, and other high-risk settings.
 

01/ High Protection Level IIC


Dual-head emergency lighting features intelligent display and fault alarm functions, a low-power design, energy conservation and environmental protection, and excellent protection performance.

02/ Optional Metal Test Button


A metal test button option is available for sensitive operation and enhanced durability.

03/ Operating Status Indicator


Clearly indicates the operating status of the device, facilitating real-time monitoring and maintenance.

04/ Stainless Steel Braided Hose


The flexible stainless steel braided hose is corrosion-resistant and stretch-resistant, suitable for a variety of installation environments.

05/ Silicone Waterproof Seal


Highly elastic silicone seal effectively protects against water and dust, enhancing device protection.

06/ High-Efficiency Secondary
Dimming Lens


Optical-grade lens design achieves efficient light distribution and multi-mode lighting, ensuring energy savings and uniform brightness.

 

 

Dimension&Installation

 

01/ Precautions for Use


·  Installation must be performed by qualified personnel.
·  Before installation, check that the basic data listed on the explosion-proof sign light's nameplate meets the actual operating conditions.
·  Check that the compression seals and gaskets in the light's inlet are complete and intact.
·  The grounding must be secure and reliable.
·  All fasteners must be secured to prevent loosening.
·  During operation, it is strictly forbidden to open the cover of the explosion-proof sign light while it is powered on.
·  After installation or maintenance, ensure that the seals at the inlet are tightly compressed to prevent water from entering the light, causing malfunction or compromising explosion-proof performance.
·  After wiring, carefully inspect the flameproof surface for defects such as bumps and scratches. If qualified, apply 204-1 anti-rust oil.

 

02/ Installation Wiring Diagram

· This product has internal wiring terminals. Remove the six M6 hexagon socket screws on the front cover to open the cover.
· For secure wiring, install a pin-type or U-shaped cold-press terminal at the end of the cable.
· Please connect the cables at the terminal block * .
· For products using an AC220V power supply, wiring does not depend on the wire color or polarity.
· For products using a DC24-36V power supply, connect the red wire to the positive terminal (+) and the black wire to the negative terminal (-).
· This product comes with a 500mm cable for testing purposes.

   

Application

 

Product Applications:

· Warehouse
· Manufactory
· Oil Refining
· Industry
· Offshore Oil Platforms
· Zone 1 and Zone 2
· As signs or signal alarms around the top of buildings
· Places with high protection requirements and humidity
· For IIA, IIB, IIC explosive gas environments
· For temperature groups T1~T6
· For other dangerous environment for general lighting and operational lighting
· For energy saving renovation projects and maintenance & replacement for difficult places

Company Profile

About Lampsuite

Lampsuite was established in 2016. It is a national high-tech enterprise that intearates R&D production, sales and service. The headquarters is located in Changzhou Dianya Plaza and serves as the leader of explosion proof lighting industry.

There are more than 200 workers including the R&D team, technical engineers and other workers. We have more than 28 production lines. Monthly output can reach 10000 units.

Among them, Lampsuite Lighting upholds strict quality management, applies new ideas, new forces, new technologies, and is committed to R&D and production various kinds of industrial lighting fixtures, and provides professional customization according to the individual needs of the market such as oil, chemical, natural gas, marine platform, coal mine, public security, fire, railway, highway, port and other industries.

Packaging & Shipping

 

FAQ

1. Who are we?
We Lampsuite, are based in Jiangsu, China, start from 2014, have been in the explosion proof lighting industry for about 10 years.

2. How can we guarantee quality?
ATEX, CE certification5 year warranty Complete testing and after-sales mechanism

3.Is a sample available?
Yes, sample available. We can also customize for 1 pcs of sample.

4. Can I be your agent?
Yes. After being agents, we can offer you agents's price and optional service.

5.Can I get a price list?
Yes, I can offer you a price list of porpular models for your reference, please contact zoe accordingly.