IP68 100W LED Explosion Proof High Bay Light Gas Station LED Lamp Fixtures Explosion-Proof Light 120lm/W 3000K-6500K

• Lamp Body Material: Aluminum Alloy
• IP Rating: IP66
• Irradiated Area: ≥30m²
• Input Voltage: 220v
• Color Temperature: Warm White
• Emitting Color: White
• Certification: CCC, CE, RoHS
• Transport Package: Carton
• Specification: 253× 185mm
• Trademark: Maxtree
• Origin: Shang Hai
• HS Code: 9405409000
• Production Capacity: 3000PCS/Month

Product Description

Product Description

Get bright and ambient light for highly humid areas. This LED explosion proof light is eligible for a bright lighting effect that does not tend to lose its illuminating capability in locations where the atmospheric pressure is harsh. In addition, you can opt for these lights in several areas, such as the oil & gas, chemical, ocean, aerospace fields, alcohol factories, intensive factory sites, etcetera.

Since the lights are explosion proof, they can retain challenging atmospheric environments, especially in locations where dust and temperature rate is pretty much. Furthermore, these lights have a 120 degrees beam angle illumination that allows the light to disperse its 5000K CTT illumination to the widest extent. Moving on, this is a dimmable LED explosion proof light that allows you to set its illumination level depending on the location you are choosing the light for.

EXCELLENT HEAT CONDUCTIONAND STRONGER HEAT

 

The whole lamp adopts air diversion and heat dissipation structure design;

 

The radiator adopts special ADC12 alloy aluminum material for die casting, which is formedby high pressure die casting, with high strength, fast heat conduction and strong heatdissipation;

 

Adopt silicone grease with thermal conductivity of 3.0, which can conduct heat more quickly

BRAND-DRIVEN AND MORE STABLE

 

Adopt first-line well-known brand power supply (optional Meanwell, Moso, DONE, Osram, InventronicsDriver, etc.), with guaranteed quality and three guarantees;

 

The powersupply adopts the latest wide voltage technology, which has the characteristicsof constant current output, lighting protection, surge protection, shortcircuit and overvoltage protection, etc. The powerfactor is as high as 0.99, and the quality is more stable;

 

GOOD "CORE" AND HIGH LIGHT EFFICIENCY

 

The first-line brand CREE LED light-emitting chip is adopted, which has high brightness and high light efficiency, and the chip light efficiency is > 130 lm/W;

 

The performance is stable and the average service life of the chip is as long as 100,000 hours;

 

Smt array patch technology is adopted, which has high heat conduction efficiency and low light attenuation;

 

 

Key features

Round Explosion-Proof Fixture

Suitable for hazardous environments where flammable gases or vapours, flammable liquids, and combustible dust and/or ignitable fibers may exist

Also suited for wet locations, marine environments, and high vibration applications

Die cast aluminum - Orange finish

IP66 driver with 10kV surge protection

Atex II2G Ex db IIC T6 Gb

Faceted reflectors in each LED chip for glare control and beam precision

Tempered glass lens allows for soft, uniform light

Complete with yoke mount and 1m power cord

 

Detailed Photos

 

Product Parameters

The Maxtree LED is built to perform effectively and economically in areas that may be difficult to service, expensive to shut down or any location requiring an increased degree of safety. Compared with conventional lighting, the Maxtree LED consumes up to 85% less energy and typically lasts as long as 50,000 hours or more. 

Power	70-100w
Size	299×186×174mm
Weight	4.8kg
Rated voltage	AC220V 50/60Hz
Explosion Proof Grade	Ex d B T6
Lighting Angle	15/25/36/45/ 60/90/120°
Protection level	IP66
Anti-corrosion grade	WF2
Operating Temperature	-30~50°C
Storage Temperature	-30~50°C
Anticorrosion grade	WF2
LED'S Operating Life	100000Hours
Color Rendering Index	≥70 RA
Power Factor	>0.95PF

 

Installation Instructions

  

 

Application scenarios

Widely used in petroleum mining, oil refining, chemical industry and other dangerous environment for general lighting and operational lighting;
It could work in Zone 1 and Zone 2 of explosive gas environment;
It could work in Zone 21 and Zone 22 of flammable dust environment;
It could work for T1-T6(T5) of temperature group;
It could work for energy saving renovation projects and maintenance & replacement for difficult places;
It could work for places with high protection requirements and poor wet environment.

More Products

 

   
  For more product details, specifications and certification, please contact us

 

FAQ

 

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What's your  delivery time?
A:Sample needs 5-7 days, mass production time needs 7-12 days.

Q3. What's your MOQ?
A: 1pc for sample checking is available

Q4. How do you ship the goods?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 4-7 days to arrive.

Q5: Can you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty for our products.

Q6: How to deal with the faulty?
A: First, our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
    Second, during the guarantee period, we will send new lights . For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.